MSFS2024 Beechcraft Bonanza G36 Mod updated to v1.0.12

Changelog v1.0.12:

• Adjusted the idle fuel flow.

The update for the MSFS2024 Beechcraft Bonanza G36 Mod can be downloaded from our Discord support server. The download link is available in the ‘Downloads’ channel.

Daedalus BS214 v1.0.0 Released on Just Flight Store

Daedalus BS214 is now available for purchase from the Just Flight store and will soon be released on the Flight Simulator Marketplace.

Current version: v1.0.0

In v1.0.0, to ensure compatibility with the MSFS Marketplace and future MSFS 2024 Sim Updates (SUs), we had to remove the VC-integrated EFB for MSFS 2024. This is because MSFS 2024 SimAttachments are not officially supported for MSFS 2020–native aircraft by the simulator.

Please note that the aircraft is no longer available for purchase from our website. Customers who previously purchased through our website will continue to receive support and future updates from the v0.1.x series.

Daedalus BS214 updated to v0.1.15

Changelog v0.1.15:

• 3D Model: Animated the Oxygen Bottle Gauge.
• 3D Model: Added a feature to hide the copilot avatar in exterior views when the copilot payload is set to zero.
• Flight Model: Engine & Flight model tuning.
• Code: Fixed an issue with hPa displaying with a decimal point in the Backup Attitude instrument.
• Code: Simulated airspeed indicator failure under specific conditions.
• Code: Simulated stress and damage for the Rotax 915iS engine. For engine limitations, please refer to the manual.
• Added engine wear gauges to the G3X Touch EIS under the INFO tab.
• Added a switch on the right side of the panel to enable or disable engine wear.
• Added a button on the right side of the panel to reset engine wear and extinguish an engine fire if triggered.
• Added ENGINE FIRE warning to the G3X Touch PFD annunciations.
• Engine wear data are stored in LVars and persist between flights.
• Code: Updated engine RPM gauges to show values rounded to multiples of 10.
• Code: Added tooltips to Circuit Breakers.
• Configuration: Adjusted the pilot camera view.
• Sound: Fixed an issue where engine sounds were muted in MSFS2024 after returning to Free Flight from the menu.

Please login to your account to download the update.

Update instructions included in the Daedalus_BS214_Changelog.txt file inside the Documentation folder.

Daedalus BS214 updated to v0.1.14

Changelog v0.1.14:

• 3D Model: Added a tail skid to prevent tail strikes.
• Configuration: Changed the lights intensity in the MSFS2024 edition.
• Configuration: Adjusted some circuit power settings.

Please login to your account to download the update.

Update instructions included in the Daedalus_BS214_Changelog.txt file inside the Documentation folder.

MSFS2024 Beechcraft Bonanza G36 Mod updated to v1.0.11

Changelog v1.0.11:

• Fixed the order of the cameras instruments views.

The update for the MSFS2024 Beechcraft Bonanza G36 Mod can be downloaded from our Discord support server. The download link is available in the ‘Downloads’ channel.

Daedalus BS214 updated to v0.1.13

Changelog v0.1.13:

• Configuration: Changed default throttle values to 15% when starting on runway to prevent engine shutdowns at high-altitude airports.
• Flight Model: Fixed an issue that was preventing Pushback from working correctly in the MSFS2024 edition.

Please login to your account to download the update.

Update instructions included in the Daedalus_BS214_Changelog.txt file inside the Documentation folder.

MSFS2024 Beechcraft Bonanza G36 Mod updated to v1.0.10

Changelog v1.0.10:

• The calculation for the cyan fuel flow leaning marker has been fixed. It now covers the full RPM range from 2500 to 2700. From 2600 to 2700 RPM, it follows the high schedule; from 2500 to 2600 RPM, it follows the low schedule. To display a value (indicating that the aircraft is climbing), a vertical speed of more than 100 FPM is required. Please note that the marker may not disappear completely when the aircraft is not climbing—it will instead remain at the zero position.

The update for the MSFS2024 Beechcraft Bonanza G36 Mod can be downloaded from our Discord support server. The download link is available in the ‘Downloads’ channel.

MSFS2024 Beechcraft Bonanza G36 Mod updated to v1.0.9

Changelog v1.0.9:

• Enhanced the EIS gauges for closer alignment with the real G1000® NXi.
• Added G36TN variant.
• Tornado Alley Turbo TNIO-550 – Max Manifold Pressure: 32inHg, Max Fuel Flow: 35GPH, Max TIT: 899°C, Max CHT: 238°C, Max Oil Temp: 116°C.
• Fuel Capacity increased to 120Gal (114Gal useable)
• Added TIT instrument to G36TN variant.

The update for the MSFS2024 Beechcraft Bonanza G36 Mod can be downloaded from our Discord support server. The download link is available in the ‘Downloads’ channel.

MSFS2024 Beechcraft Bonanza G36 Mod updated to v1.0.8

Changelog v1.0.8:

• Changed the default throttle setting to 15% when starting on the runway to prevent engine shutdown at high-altitude airports.
• Added the ‘AFT DOOR’ and ‘AC DOOR EXTD’ caution annunciations on the PFD.
• Removed the CABIN HEAT, AFT CABIN HEAT and DEFROST levers.
• Removed the A/C and BLOWER switches.
• Added caps to removed levers and switches.
• Added the Pilot Window, simulating ram airflow.
• Added the Overhead Vent Outlets, simulating cool airflow.
• Added and simulated the Automatic Climate Control System (ACCS). A diagram showing the system’s buttons and functionality has been added to the documentation folder (ACCS_diagram.png). Windshield defogging is now handled via the ACCS.
• Heated air and windshield defogging are available only when engine oil temperature exceeds 40°C.
• Cooled air supply to the cabin requires engine speed above 1200 RPM.
• Added ‘CABIN TOO COLD’ and ‘CABIN TOO HOT’ advisory annunciations on the PFD (simulated only; not present in real-life aircraft), to provide temperature feedback in-sim.
• Simulated a 5 BHP power loss when the ACCS compressor is engaged. For maximum aircraft performance, the compressor can be switched off.
• Simulated the Throttle Go-Around button.
• Simulated the Throttle Limiter switch.
• Removed circuit breakers that do not exist in the real aircraft (stock aircraft seem to use circuit breaker panels from the Baron G58 rather than the Bonanza G36).
• Updated some circuit breaker labels to match the real aircraft.
• Added caps to removed circuit breakers.
• Redesigned the electrical system and simulated the circuit breakers as closely as possible to the real aircraft.
• Simulated the Yoke Pitch Trim switch.
• Simulated the Yoke Autopilot Disconnect button.
• Simulated the Yoke Control Wheel Steering (CWS) button.
• Simulated the Yoke Ident button (Transponder Ident).
• Simulated the digital Hourmeter.
• Fixed wheel chock positioning in preflight mode.

The update for the MSFS2024 Beechcraft Bonanza G36 Mod can be downloaded from our Discord support server. The download link is available in the ‘Downloads’ channel.

Daedalus BS214 updated to v0.1.12

Changelog v0.1.12:

• 3D Model: Fixed an issue in the MSFS2024 edition where mouse clicks could pass through the EFB screen and interact with circuit breakers behind it.

Please login to your account to download the update.

Update instructions included in the Daedalus_BS214_Changelog.txt file inside the Documentation folder.

MSFS2024 Beechcraft Bonanza G36 Mod updated to v1.0.7

Changelog v1.0.7:

• Adjusted Copilot avatar position.

The update for the MSFS2024 Beechcraft Bonanza G36 Mod can be downloaded from our Discord support server. The download link is available in the ‘Downloads’ channel.

MSFS2024 Beechcraft Bonanza G36 Mod updated to v1.0.6

Changelog v1.0.6:

• Improved the payload distribution in EFB.
• Added Alternate Static Air Source.
• Added Oxygen System. Equipped with a 115 cu. ft. oxygen bottle and an O2D2 delivery system, this setup provides sufficient oxygen for two occupants breathing at 18,000 feet for approximately 16 hours. An oxygen pressure gauge and a dedicated oxygen switch have been added to the instrument panel. The number of oxygen-consuming passengers is determined based on the aircraft payload. To be considered a passenger for oxygen planning purposes, a seat must have at least 20 kg of added weight.
• A ‘USE OXYGEN MASKS’ advisory annunciation has been added to the PFD, triggered when flying above 12,500 feet and the oxygen system is turned off (simulated only; not present in real-life aircraft).
• A ‘LOW OXYGEN PRESS’ caution annunciation has been added to the PFD, triggered when oxygen pressure drops below 300 PSI (simulated only; not present in real-life aircraft).
• An Oxygen Flow sound has been added.

The update for the MSFS2024 Beechcraft Bonanza G36 Mod can be downloaded from our Discord support server. The download link is available in the ‘Downloads’ channel.

Daedalus BS214 updated to v0.1.11

Changelog v0.1.11:

• Flight Model: Adjusted the propeller pitch moment. As a result, the required pitch trim for takeoff has changed. Please refer to the manual under the “Technical Specifications” and “Performance” sections for more details.

Please login to your account to download the update.

Update instructions included in the Daedalus_BS214_Changelog.txt file inside the Documentation folder.

MSFS2024 Beechcraft Bonanza G36 Mod updated to v1.0.5

Changelog v1.0.5:

• G1000 default NAV1 mode reverted back to GPS.

The update for the MSFS2024 Beechcraft Bonanza G36 Mod can be downloaded from our Discord support server. The download link is available in the ‘Downloads’ channel.

Daedalus BS214 updated to v0.1.10

Changelog v0.1.10:

• Configuration: Reordered camera quick views.
• Flight Model: Enabled assistances.

Please login to your account to download the update.

Update instructions included in the Daedalus_BS214_Changelog.txt file inside the Documentation folder.

MSFS2024 Beechcraft Bonanza G36 Mod updated to v1.0.4

Changelog v1.0.4:

• Increased windshield transparency for improved clarity.
• Fixed some cockpit animation sounds that weren’t playing properly.
• Adjusted the position of the exhaust heat effect.
• Adjusted the manifold pressure at idle and low RPM.

The update for the MSFS2024 Beechcraft Bonanza G36 Mod can be downloaded from our Discord support server. The download link is available in the ‘Downloads’ channel.

Daedalus BS214 updated to v0.1.9

Changelog v0.1.9:

• Code: Added flaps position and transit lights to the Annunciator Test button.
• Code: Installed an ice detection sensor on the intake duct of each engine. When ice is detected, the sensor automatically opens the alternate intake duct by activating the ENG ANTI ICE.

Please login to your account to download the update.

Update instructions included in the Daedalus_BS214_Changelog.txt file inside the Documentation folder.

MSFS2024 Beechcraft Bonanza G36 Mod updated to v1.0.3

Changelog v1.0.3:

• Fixed an issue in v1.0.2 that prevented the engine from starting in the cold and dark state.

The update for the MSFS2024 Beechcraft Bonanza G36 Mod can be downloaded from our Discord support server. The download link is available in the ‘Downloads’ channel.

MSFS2024 Beechcraft Bonanza G36 Mod updated to v1.0.2

Changelog v1.0.2:

• Added the annunciator test button (ANNUN TEST).
• Changed all the *.flt files to better configure the aircraft’s start-up flight states.
• Adjusted the Glareshield light intensity.
• Fixed the issue with the G1000 audio panel flashing when starting a flight airborne at night.
• The VC-integrated EFB was moved to the copilot’s side.
• Added a new camera under ‘Instruments’ for the EFB view.

The update for the MSFS2024 Beechcraft Bonanza G36 Mod can be downloaded from our Discord support server. The download link is available in the ‘Downloads’ channel.

Daedalus BS214 updated to v0.1.8

Changelog v0.1.8:

• Flight Model: Adjusted some parameters to achieve smoother steering on the ground.

Please login to your account to download the update.

Update instructions included in the Daedalus_BS214_Changelog.txt file inside the Documentation folder.

MSFS2024 Beechcraft Bonanza G36 Mod updated to v1.0.1

Changelog v1.0.1:

• Added the Windshield Defrost simulation. To activate the defrost, the FIREWALL AIR lever must be pushed, the CABIN HEAT lever must be pulled, the DEFROST lever must be pulled, and the engine oil temperature must be above 30°C. You can monitor the oil temperature from the ‘Engine/System’ page on the MFD.
• Added an ice detect sensor on the intake duct. The sensor simulates the spring-loaded door in the intake duct which opens automatically when ice detected, by turning on the ENG ANTI ICE. The sensor has Wear And Tear damage.
• Added the ALT AIR lever simulation. When the ice detection sensor located in the intake duct fails or the aircraft is out of electricity, you can Pull and Release the ALT AIR lever to activate the ENG ANTI ICE (simulating the manual opening of the spring-loaded door in the intake duct). This works only when ice has been detected.
• Fixed the ambient lighting issue that occurred while the aircraft starts in a cold and dark state.
• Adjusted some parameters to achieve smoother steering on the ground.
• Adjusted Taxi and Landing lights (intensity, glow).

The update for the MSFS2024 Beechcraft Bonanza G36 Mod can be downloaded from our Discord support server. The download link is available in the ‘Downloads’ channel.

MSFS2020 Beechcraft Bonanza G36TN Addition

The MSFS2020 Beechcraft Bonanza G36TN Mod moved to our website. The latest version is: v1.0.12

Important: Please read the v1.0.12 changelog before installing or updating it.

To download the MSFS2020 Beechcraft Bonanza G36TN, you must join our Discord Support server. The download link can be found in the ‘Downloads’ channel.

MSFS2024 Beechcraft Bonanza G36 Mod released

Beechcraft Bonanza G36 Mod released for Microsoft Flight Simulator 2024.

Initial release version is: v1.0.0

To download the MSFS2024 Beechcraft Bonanza G36 Mod, you must join our Discord Support server. The download link can be found in the ‘Downloads’ channel.

Daedalus BS214 updated to v0.1.7

Changelog v0.1.7:

• Configuration: Fixed a typo in the checklist.

Please login to your account to download the update.

Update instructions included in the Daedalus_BS214_Changelog.txt file inside the Documentation folder.

Daedalus BS214 updated to v0.1.6

Changelog v0.1.6:

• Code: Fixed an issue where the cabin temperature was not initialized correctly due to MSFS2024 changes in Simulation Time (MSFS2024 edition). Added a 10-second delay to ensure that OAT is read correctly when starting the flight. When you start your flight airborne, the cabin temperature initializes to 24°C.

Please login to your account to download the update.

Update instructions included in the Daedalus_BS214_Changelog.txt file inside the Documentation folder.

Daedalus BS214 updated to v0.1.5

Changelog v0.1.5:

• Code: Fixed an issue where the tablet would disappear when clicking in the center of the screen (MSFS2024 edition).

Please login to your account to download the update.

Update instructions included in the Changelog.txt file inside the Documentation folder.

Daedalus BS214 updated to v0.1.4

Changelog v0.1.4:

• Code: Modified the A/C controller functionality. Please refer to the manual under the “A/C” section for more details.
• Flight Model: Adjusted and tuned engine temperatures. Engine temperatures now initialize when starting on the runway or in the air.
• Code: Added RPM warning annunciation on the PFD.
• Effects: Repositioned all engine smoke and heat effects to spawn correctly.
• Effects: Limited the visibility of the exhaust heat effect to airspeeds below 50kts.
• 3D Model: Created a custom tablet to support the default EFB VC integration in MSFS2024 edition. Please refer to the manual under the “MSFS 2024 compatibility notes” section for more details.
• Manual: Updated the Cruise Performance tables, including the range in nautical miles (Nm). Please refer to the manual under the “Performance” section for more details.

Please login to your account to download the update.

Update instructions included in the Changelog.txt file inside the Documentation folder.

Daedalus BS214 updated to v0.1.3

Changelog v0.1.3:

• 3D Model: Removed the default EFB sim attachment VC integration in the MSFS2024 compatible edition. Unfortunately, MSFS2024 SU1 has discontinued compatibility with sim attachment integrations for MSFS2020 aircraft. Please note that the default EFB is always available and accessible from the toolbar.

Please login to your account to download the update.

Update instructions included in the Changelog.txt file inside the Documentation folder.

Daedalus BS214 updated to v0.1.2

Changelog v0.1.2:

• Flight Model: Fixed the bug that prevented asymmetrical yaw from functioning properly during single-engine flight in the MSFS2024 edition.

Please login to your account to download the update.

Update instructions included in the Changelog.txt file inside the Documentation folder.

Daedalus BS214 updated to v0.1.1

Changelog v0.1.1:

• Effects: Repositioned the engine exhaust heat effect.
• 3D Model: Added static electricity wicks to the wings and tail.
• 3D Model: Fixed geometry mesh flaw on the rudder.
• Code: Fixed an issue where the cabin temperature would sometimes fail to initialize correctly when loading the aircraft.
• Flight Model: Fixed a bug that prevented asymmetrical yaw from functioning properly during single-engine flight.

Please login to your account to download the update.

Update instructions included in the Changelog.txt file inside the Documentation folder.

MSFS 2020 vs MSFS 2024 appearance differences

Currently, there are some differences between the two simulators affecting the appearance of the aircraft. These differences are primarily caused by the new lighting and texture rendering in MSFS 2024. Also, the avatars from MSFS 2020 are not currently shown in MSFS 2024.

The correct aircraft appearance is as shown in MSFS 2020, as this is a native MSFS 2020 aircraft.

MSFS 2020 1.38.2.0 MSFS 2024 1.2.11.0

The aircraft appearance in MSFS 2024 will be fixed in future updates once the MSFS 2024 stabilizes and the SDK reintroduces the Resync option.

Daedalus BS214 released

Daedalus BS214 released for Microsoft Flight Simulator 2020 (compatible with Microsoft

Flight Simulator 2024).

Initial release version is: v0.1.0